Water Rooms Glitchy Waves Help!

[TombGuardian]

Hello!
Asking here because I'm desperate

between the two rooms there is a water Crack...
both rooms have the same Wave level too

How can I fix this? anyone knows please? would save my level

[rufierto]

The reflection numbers in the rooms above the water rooms must not be the same. Also the water room numbers 1-4 need to be the same.

[TombGuardian]

The reflection numbers in the rooms above the water rooms must not be the same. Also the water room numbers 1-4 need to be the same.

Already did that but does not work

[rufierto]

Now that is weird...

[Kitkat]

Did you press the "draw doors" button before outputting the level? It always smooths the lighting between rooms, maybe it would help with this?

[TombGuardian]

I had no reflections AT ALL
I fixed it putting Reflections in both the water and the upper room...
So that means that if the bug happens, you are forced to use reflections

[Fluen]

Strange. I wonder, if other things might influence this.

No, you shouldn't need reflections in the dry rooms. Just make sure, that all values are the same on both sides of the portal. And as others have already said, that goes for the values in the water rooms as well.

I have a whole series of rooms with water and above dry rooms with no reflections. They work just fine.

[justin]

Just going through old posts to catch up

Figured I'd jump into this one since I'm familiar with the glitch, so hopefully it helps someone.

I've only experienced this when the two water rooms have a different length running parallel to the door at the connection. That is to say, if the length of the right wall of the left room is 10 blocks, and the length of the left wall of the right room is only 9 (even if the overall sizes of the rooms are the exact same), the waves may have a different starting point and be out of sync.

I had to change the room division to fix this issue a long time ago.